South Portland, ME  

207-767-3254 Contact Us
Inventory Search
TO
TO
TO
Search
2021 Mako 214 CC
Boat Details
Year 2021
Length 21 ft 5 in (6.53 meters)
Located in South Portland, ME
Sale Status Active
Number of Engines 1
Horsepower (total) 225 hp
Engine Make: MERCURY MARINE
Engine Model: 225XL,4S,4.8" 1.85 WRM
Fuel Capacity 91 gallon
Hull Material Fiberglass
Deadrise at Transom 18 °
Beam 8.5 ft
Dry Weight 3,735 lb
Hull ID BUJ42452I021
Fuel Tank Count 1
Length Overall 21.42 ft
Max Draft 1.17 ft

With its aggressive Deep V hull and interior creature comforts, the MAKO® 214 CC is the ideal balance of fishing performance and family convenience. Bow, forward console and aft seating adds comfort for family and friends, and the optional deck filler expands the forward lounge area.

The versatile 214 CC is overbuilt for safety and comfort. It rides on the legendary MAKO Deep V hull, which dominates chop with its aggressive deadrise and throws down spray with its reverse chines, resulting in a smooth, dry and stable ride. All this, and it's backed by the best factory warranty in saltwater boats—the MAKO Assurance.

  • Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
  • Hull/deck chemically bonded, fastened 360° w/316 stainless fasteners & injected w/expanding foam
  • NEW aft stern seating w/folding center backrest, removable bow cushions/backrests & 360° coaming bolsters
  • NEW Mercury® SmartCraft® digital gauges & interior courtesy lights
  • NEW molded-in swim platform w/retractable stainless-steel ladder
  • Under-gunnel port & starboard rod racks for 6 rods
  • Center console w/electronics mounting surface, Ritchie Navigation® Voyager compass, stainless steel grab rail, acrylic windscreen & storage
  • Leaning post helm seat & removable forward-console seat w/72-qt. (79.49 L) cooler
  • 210-qt. (198.73 L) in-deck storage w/recess for 5-gal. (18.93 L) bucket
  • Port & starboard bow seating w/108-qt. (102.21 L) insulated storage w/drains below
  • Non-skid surface on walking flats, foredeck, gunnel tops, sole, stern platform & hatch covers
Additional Specs
  • Length:21' 5" 
  • Beam: 8' 6" 
  • Bottom width: 6' 7.5" 
  • Max. Recommended HP: 250 HP
  • Fuel Capacity: 91 gal.
  • Max. Person Capacity: 10 persons
  • Max. person weight: 1700 lbs.
  • Max. person, motor & gear weight: 2550 lbs.
  • Interior depth: 27" 
  • Transom height at center line: 25" 
  • Deadrise: 18 degrees
  • Draft: 14" 
  • Dry weight: 3735 lbs.
  • Average hull weight: 3100 lbs.
  • Average package weight: 4535 lbs.
  • Package height: 9' 3" 
  • Package height w/T-top or hardtop: 11' 2" 
  • Storage Length: 30' 8" 
Standard Features

Certification & Safety

  • Backed by the MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
  • NMMA® certified
  • Factory leak tested for hull, plumbing & fitting integrity
  • Horn
  • Flush-mounted Ritchie Navigation® Voyager compass

Console

  • Custom anodized aluminum steering wheel w/knob
  • Binnacle-mounted motor control(s)
  • Mercury® SmartCraft® digital gauges
  • Heavy-duty electrical switching system w/battery selector switch(es)
  • Switch panel w/manual reset circuit breakers & illuminated switches
  • Easy access to helm electronics, instruments & switches
  • FUSION stereo w/4 speakers
  • Removable forward-console seat w/72-qt. (68.14 L) insulated, drained cooler
  • Integrated full-width footrest
  • Acrylic windscreen
  • Marine-grade tinned wiring w/submersible connectors
  • Lockable, sealed glovebox
  • Extra-large electronics mounting surface 
  • 2 console drink holders
  • 12V DC outlet

Leaning Post

  • Anodized aluminum leaning post
  • Helm seat w/flip-up cushion
  • Storage below seat
  • Space below leaning post for optional cooler
  • Rod holders

Top

  • Outrigger-ready canvas T-top w/4 rod holders, electronics box w/mounting plates for antenna & spreader lights
  • .25" (6.35 mm) aluminum backing-plate reinforcement for T-top

Head

  • Head enclosure/storage space w/stainless steel latch
  • Wiring access hatch & battery access
  • Main distribution panel inside head
  • Courtesy light

Interior

  • Anchor locker
  • Foredeck dodger mounting boss
  • Port & starboard forward seats w/108-qt. (102.21 L) insulated storage below w/gravity overboard drainage
  • Forward cushions w/removable backrests
  • 210-qt. (198.73 L) in-deck storage w/recess for 5-gal. (18.93 L) bucket
  • Low-profile brushed anodized aluminum bow rails
  • 2 gunnel-mounted rod holders
  • Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.13 m) long
  • Aft stern seating w/folding center backrest
  • Molded non-skid surfaces throughout
  • Raw water outlet
  • Bilge access hatch
  • 360° coaming bolsters
  • Five 6" (15.24 cm) polished marine-grade stainless steel cleats
  • 2 stainless steel bow chocks

Performance

  • Legendary dry-riding MAKO® hull
  • Aggressive deep V hull design
  • Performance lifting strakes
  • Recessed electric trim tabs
  • Factory-matched stainless steel propeller

Construction & Exterior

  • Color: MAKO® Bone White gelcoat
  • 100% composite construction
  • Coosa® Bluewater 100% composite transom core
  • Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core
  • Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
  • 1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish
  • Closed-cell foam-injected stringer grid for USCG-approved flotation
  • Heavy-duty rub rail w/stainless steel insert
  • Premium marine-grade stainless steel hardware & fasteners for corrosion resistance
  • Closed-molded hatch covers w/finished undersides & integrated gaskets
  • Aluminum backing plates for cleats & chocks
  • Swim platform w/3-step stainless steel ladder

Electrical, Mechanical & Plumbing Systems

  • High-speed raw water intake
  • USCG-compliant navigation lights
  • Interior courtesy lights
  • 2 cockpit courtesy lights & 1 head light
  • Dual battery rigging w/voltage sensitive relay (VSR) & emergency parallel switch
  • Marelon® corrosion-free seacocks on all below-water thru-hull fittings
  • Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment

Optional Trailer

  • OPTIONAL tandem-axle EZ Loader® aluminum trailer available.
  • NMMA® certified.
  • DOT approved.
  • Tandem-axle brakes.
  • 14" (35.56 cm) radial tires w/galvanized V5 wheels.
  • Oil bath hubs.
  • Leaf spring suspension.
  • Heavy-duty winch w/nylon strap & safety strap.
  • Stainless steel hardware.
  • Galvanized steel components.
  • LED lighting.
  • PVC loading guides.
Disclaimer
* We employ best efforts to present accurate pricing, specifications, features and availability for models shown on this site. On occasion, data transmission errors may produce anomalies in information presented. Photos could show optional accessories not included in the listed price or not available on the actual model in stock. Should you have questions about what you see here, your dealer will be able to confirm correct availability, model content and pricing. Inventory shown is subject to prior sale or transfer to another location.
Base Price $62,325
   Included Options (Call For Details) $9,020
   Prep $495
   Freight $2,750
Your Price* $74,590
Additional Information
Mako Website
Dealer Location
Name Port Harbor Marine - South Portland, ME
Location 1 Spring Point Drive
South Portland, ME 04106
US

Port Harbor Marine/ Portland

207-767-3254
1 Spring Point Drive
South Portland, ME 04106